Product Description

Instrument structure:
The structure of the heat-sealing tester is composed of 4 parts: pneumatic drive system, heat-sealing equipment, temperature adjustment system and time adjustment system.
Pneumatic drive system:
It includes pressure gauge, guide stick, cylinder, pneumatic valve, pressure regulating handle and so on. You can pull the pressure-regulating handle outward, rotate to the right side to adjust the heat sealing pressure to a high value, and rotate to the left side to reduce it. After setting the pressure, please press the handle to the side of mainframe to lock the air pressure.
Heating-seal device
It is composed of the upper and lower heat-sealing sticks, of which the upper one is connected with a cylinder. There is an insulating plate in the upper part, which can prevent heat transmit to the cylinder. The heat-sealing stick is made of aluminum, and the center is heater. There is a silica gel plate in the upper part of the lower heat-sealing stick, which can mitigate pressure impact during heat sealing. Temperature measurement system was installed at the back of the heat-sealing stick.
Temperature adjustment system:
The upper temperature controller controls the temperature of upper heat-sealing stick, and the rear temperature controller controls the temperature of lower heat-sealing stick. The temperature can be set at will through adjusting the on the dial plate.
Time adjustment system:
Time adjustment system: The heat-sealing time can be set at will through adjusting the on dial plate. The setting scope of time is 0.*1s to **9.9h. Press the foot switch under the manual state, and the heat-sealing stick will be pressed together. Under the automatic state, the press-fitting time of upper and lower heat sealing sticks are controlled by a timer automatically, it can automatically recover later. The unit of timer is 0.1 second in general. There is time adjusting on the panel of the timer, and the heat-sealing time can be adjusted at will.

Specifications
Power AC**0V  *0HZ
Compressed air 8kg/cm2
Heat sealing plane **0mm×*0mm slick (With silicon pad in lower seal stick)
Heat sealing temperature room temperature *0~**0°C (Precision 1°C)
Heat sealing time 0.*1s~*9.*9h;
Heat-sealing pressure 0~0.8Mp.
Dimension **0(L)mm×**0(W)mm×**0(H)mm
Weight Desktop *0Kg

Service
1 years coverage
Speedy reply, *2hrs response to customer questions
Software free update
Minor maintenance **-parts ship within *4 hrs
Major maintenance**-Technical will be sent within *5 days